Products Description

Lock-N-Lift #500B

Lock-N-Lift #500B

Product Data Sheet

Lock-N-Lift #500B Weld-In Plate

The Lock-N-Lift #500B weld-in plate is the receiver that every Lock-N-Lift tool connects to. Weld it into a road plate or any other item you need to lift, and it sits flush with the surface, so there is nothing to trip over or catch a tire. The plate has no threads and needs no routine maintenance. It is made from WCB steel for easy welding into Grade A36, A50 or A992 steel plate, and takes about 20 minutes to install in the centre of a 1-inch road plate.

Specifications

Dimensions4-1/2″L x 4-1/2″ W x 5/8″ Thick
Weight2.2 Pounds
MaterialWCB Steel Per ASTM-A216
Heat TreatmentNormalize
Safe Working Load8,000 pounds
Safety Factor5:1 minimum

What are Lock-n-Lift #500B systems needed for?

Why crews use the Lock-N-Lift system:

  • Safer lifting: the tool locks positively into the weld-in receiver, cutting down on chains, hooks and hand-handling of heavy steel.
  • Faster turnaround: plates and covers can be pulled and reset quickly, which matters at the end of a shift or during emergency utility work.
  • Better ergonomics: workers rig the lift standing upright instead of bending and prying.
  • Wide compatibility: one tool works with any plate, cover or item fitted with a Lock-N-Lift weld-in receiver.
  • Built to last: made from high-strength steel to stand up to daily use.
  • Easy to carry: compact enough to keep in the truck and move between sites.
  • Low maintenance: the receiver has no threads to clean; just inspect the tool regularly.

Lock-N-Lift is also widely used on manhole covers and other heavy steel lids. The tool locks onto the cover so one worker can lift and move it without straining their back. Municipal crews, contractors and utilities that open underground access points every day use it to reduce injuries and save time.

Lock-N-Lift